In this article we’re going to examine how to create your own dog mask. We’ll cover the basics and then go on to take a look at some of the more advanced tips and tricks which you can use.

If you have a dog that likes to bark, and particularly if your dog loves to play in the backyard and other areas of the house, you will need to get them some particular dog protection.

Paper Plate 3d Dog Mask DIY Materials: This is the first part of the set-up which will look a little scary at first, but it’s really very simple. All you have to do is take a cardboard cutting board and cut the cardboard into http://blog.emahumanrights.org/?p=23082 the shape of your mask. You can not just cut a rectangular shape from the cardboard, so you will need to cut around the edge of the mask so you get something that looks like a cone. The main thing here is to be realistic with what type of paper plate that you’re using.

Then you’ll need to wrap the cardboard around the edges of the paper plate, making sure there is a good seal between the two pieces so you can make certain that nothing will leak once you put the mask on. Be sure the edges are cut so that the edges are not sharp, as this can damage the edges of the mask.

Glue it on! The next step involves using some paint. You should spray the paint over the cardboard, making certain it runs smoothly and evenly across the entire mask. You’ll want to start with one side of the mask , so that you can work your way round it before moving onto the other side. The paint has to be slightly thicker than the cardboard, and it’s best that you leave about one-fifth of an inch of paint on the edges so that it runs across the cardboard.

Don’t fret too much about the paint getting stuck into your mask. It’s easy to eliminate it later, and it’ll leave you with a nice finished mask to show off to everybody! It’s also a good idea to wash away any excess paint after you are done, so that you don’t end up with smudges or smears on your dog.

Then it is time to paste the mask on your dog’s head. First you need to make sure that you get a secure fit between the mask and your dog’s head. As soon as you’ve made sure that it’s secure, then you can start to glue the mask on the dog’s face. Take the piece of cardboard that is used for the foundation of the mask and then fold it over. Be sure that it’s quite strong and then use your hands to secure the cardboard down in place.

Keep your hands out of the way and use tape to hold it in place as you repeat the procedure on the cardboard folds until you’ve got the mask snugged securely onto the surface of your dog. Don’t make the folds too large or else it could look messy. Once you’ve done this, you can then take out the mask and attach the cardboard ears. And attach the other area of the mask onto the dog. Make certain the ears are flat and be certain it is not too short or long as this will cause some problems with the mask slipping off the dog’s face.

If you are using a dog mask because your pet security, you will have to do some sanding to make sure that it’s safe on your dog. You can do this by sanding off any excess paper which might have been eliminated from your mask.